NOTE: As of May 14, 2010 Classic Design Concepts has halted production on all Flashback components as the program transitions to new ownership.
Bodies
All Flashback builds start with a brand new Dynacorn body and now CDC can offer these same great bodies to you. We typically stock a small inventory of these, but please call to verify availability. All bodies require a $495.00 crating and handling charge and shipping charges are calculated FOB Oxnard, CA.
.jpg)
67 Flashback Body - $15,500.00
Includes: Body, Export Brace, Doors, and Decklid.
68 Flashback Body - $15,500.00
Includes: Body, Export Brace, Doors, and Decklid.
69 Flashback Body - $16,500.00
Includes: Body, Export Brace, Doors, and Decklid.
70 Flashback Body - $16,500.00
Includes: Body, Export Brace, Doors, and Decklid.
Exterior
All CDC Flashback exterior trim components are manufactured using a hand applied epoxy resin and fiberglass cloth composite to ensure component strength and stability after painting. These components were developed specifically for the new 1967-68 Mustang body shells manufactured by Dynacorn and therefore may not fit original Ford manufactured body shells without some modification. These parts are designed for professional installation and will require minor trimming, installation, and surfacing prior to paint application. All components are shipped in raw composite finish.
**All components are made to order. Please call for availability.
67 Flashback Front Fascia - $2,795.00
The CDC designed front fascia incorporates the fender extensions, grille bezel, and lower valance into a one-piece unit, minimizing complexity and smoothing the look of your vintage Mustang front end. Designed specifically for use with the 67 Flashback Hood listed below, the Flashback front fascia will not work with other OEM or Aftermarket Hoods without modification. Requires front fender and headlamp mounting modifications for installation.
Includes: Front Fascia, Fog Lamps, Fog Lamp Bezels, Fog Lamp Pocket Lenses, Brake Ducts (grille insert not included).

67 Flashback Hood - $2,395.00
The CDC Flashback hood design was inspired by the original, but now includes a small rise and smooth design for additional engine clearance and a modernized appearance. The smooth inner surface created from the two-piece design allows for show-quality finishing both inside and out. Utilizes OEM hood hinge and latch components. Designed specifically for use with the 67 Flashback Front Fascia listed above and will not work with other OEM or aftermarket fascias without modification. Not designed for use on supercharged modular engine applications due to clearance concerns.
Includes: Hood (grille inserts are not included.)


67 Flashback Rear Fascia - $1,495.00
Rear Fascia design incorporates the rear quarter panel extensions, bumper, and tail pan into a one piece unit, minimizing complexity and smoothing the look of your vintage Mustang rear end.
Includes: Rear Fascia
67 Flashback Front Fascia and Hood Package - $5,095.00
The CDC Flashback Hood and Fascia are designed to be used as a package and due to their specific overhangs, which will not work in conjunction with other hood or fascia combinations. Package savings of $95.00 over individually purchased components.
Includes: '67 Flashback Front Fascia and Hood listed above.

Complete 67 Flashback Body Package - $6,495.00
Designed for a vintage style with a slightly modern twist, this package minimizes the number of components required for fitment and final assembly and improves the look of your vintage Mustang. Package savings of $190.00 over individually purchased components.
Includes: '67 Flashback Front Fascia, Hood, and Rear Fascia listed above.

Interior
All CDC Flashback interior trim components are manufactured using a machine applied polyester resin and chopped fiberglass process for maximum durability and noise absorption. These components were developed specifically for new 1967-68 Mustang body shells manufactured by Dynacorn and therefore may not fit original Ford manufactured body shells without some modification. These parts are designed for professional installation and will require minor trimming, installation, and surfacing prior to painting or wrapping. All components are shipped in raw composite finish.
**All components are made to order. Please call for availability.
67 Flashback Interior Trim Package - $2,795.00
Designed to work as a package to significantly increase front seat headroom and rear seat shoulder room, as well as improve insulation from exterior inputs including both noise and heat.
Includes: LH & RH A-Pillar Trims, Headliner, LH & RH Upper Quarter Trims, LH & RH Lower Quarter Trims, Trunk Pass-Through Door, & Rear Center Trim Panel.
67 Flashback Dash Pad - $495.00
Manufactured from rigid composite fiberglass to allow leather wrapping without the distortion typically found in original style urethane foam components.
Includes: Composite Dash Pad
67 Flashback Kick Panel Covers - $295.00
The CDC Kick Panel Covers are rigid and far superior to flimsy plastic reproductions, allowing for much easier upholstering. The raised "rib" of the OEM cover was eliminated in this design, creating a flat surface perfect for speaker grilles. Speakers can now be easily mounted in the kick panel sheet metal, using the included speakers baffles to seal the back of the speaker from the elements.
Includes: LH & RH kick panels and LH & RH speaker baffles.

67 Flashback Door Panels - $495.00
The Flashback Door Panels are constructed of sturdy multi-piece ABS panels with composite fiberglass armrests, and are designed to be used with or without original-style Deluxe stainless door panel trim. These parts will require padding prior to wrapping to achieve similar design results as featured in the finished Flashback components.
Includes: Four-Piece LH & RH Door Panels and necessary hardware.
67 Flashback Complete Interior Package - $3,900.00
Designed for vintage style with modern convenience, this package minimizes the number of components required for fitment and final assembly, improving the overall look and fit/finish of your vintage Mustang. Purchased together, this package saves you $180 over the individual components.
Includes: '67 Interior Trim, Dash Pad, Kick Panels, and Door Panels listed above.


Please call Classic Design Concepts at 866.624.7997 for additional information.
|